1982

OEM Vent Hose Spring Clamp Need to connect the vent hose and secure it properly? Simply get these spring clips into place, and release. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

Idle Jet Holder O-Ring These O-Rings seal the idle jet holder to the main carburetor housing. O-Rings can become brittle with age and cause annoying (and dangerous) fuel leaks. NOTE: O-Rings sold individually. Contact our Tech Support Line for...

Large Oil Galley Plug (3/8"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two, one goes in the front of the block, and one goes in the rear of the block. LC Engineering...

Exhaust Collector Gasket (2 1/4" / 3 Bolt) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive seal. 3-bolt...

Thermostat Housing Gasket (Paper / Flat) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a paper gasket that offers an excellent seal for your thermostat housing...

Oxygen Sensor Gasket (2-Bolt Style) This gasket is a direct replacement for 2-bolt O2 sensors. If you have to replace the O2 sensor, you should replace the gasket as well to avoid pesky exhaust leaks. Contact our Tech Support Line for further...

Medium Oil Galley Plug (1/4"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need four of these for the crankshaft and one for the inside of the block under the oil filter...

Spring Seat Shim (.015″ / .030" / .060") Hardened Valve Spring Shims for Pro and Street Performer Valve Springs. When installing new valve springs, it is very crucial to get the springs all set up equally for proper valvetrain geometry and longevity...

OE Knuckle Stud Nut Factory Toyota knuckle hardware. Don't let knuckle stud failure ruin your day, get the best. NOTE: Sold Individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

OE Knuckle Wave Washer Factory Toyota knuckle hardware. Don't let knuckle stud failure ruin your day, get the best. NOTE: Sold Individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

DCOE Jet Cover Gasket LC Engineering offers only genuine Weber/Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment. Contact our Tech Support Line for further information at...

Oil Drain Plug Gasket (Small) This is the oil drain plug gasket for LC Engineering's small oil drain plug Part # : 1013117. OEM Toyota Part #: 90430-12031 Contact our Tech Support Line for further information at 928-575-2174. Note:...