1983

Fuel Pressure Gauge Kit (For In-Cab Use) GlowShift’s Tinted Series 30 PSI Fuel Pressure Gauge is the perfect accessory for anyone looking to keep a close eye on their truck’s fuel system pressure to ensure it’s performing at...

Holley Fuel Pressure Regulator (1-4lbs) The regulator's job is to keep the pressure in the fuel system at a constant psi (Weber carbs work best in the 2.5-3psi range). Your fuel pressure regulator controls the amount and speed at which fuel is used by...

Pro Bronze Valve Guide Set Valve Guides are made of the highest quality manganese bronze material available. This provides additional clearance between the retainer and seal for increased valve lift. Valve Guides provide excellent stability so they can...

OEM Thermostat Housing (1982-1995) OEM Thermostat Housing. OEM Toyota Part #: 16331-35041 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Vented Non-Cross Drilled Rotor Toyota Pick-Ups and 4Runners (86+) feature larger vented rotors from the factory. Earlier (79-85) trucks used solid, non-vented rotors up front along with smaller calipers. If you're installing a solid front axle on an...

Speedometer Extension Cable When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedometer cables to a dual adapter. This product should...

OEM Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...

Sidedraft Carburetor Velocity Stacks (Air Horns / Shorty) Velocity Stacks or "Air Horns" allow smooth and even entry of air at high velocities into the intake tract, and replaces the ducting from the air-box (on EFI applications) providing a cleaner...

NEW Anodized Fuel Rail (Black) LC Engineerings CNC-machined anodized fuel rails are perfect for that show truck looking to get the "edge" on the competition when the hood is popped. The fuel rails feature OEM factory mount locations to allow anyone who...

Anodized Fuel Rail (Silver) LC Engineerings CNC-machined anodized fuel rails are perfect for that show truck looking to get the "edge" on the competition when the hood is popped. The fuel rails feature OEM factory mount locations to allow anyone who...

Throttle Body Air Horn Kit Designed to improve the air flow capabilities of a Sidedraft Throttle Body, these air horns are manufactured & machined in-house for the maximum accuracy and quality. The full radius design is accepted by the performance...

Billet Wire Loom (11mm Livewire Separators) Not only does this setup look great, but the LC Engineering billet plug wire loom allows you to route your wires away from exhaust heat without worrying about them coming loose. The LC Engineering Billet Plug...