1983

Foam Sock Filters These filter socks fit all sidedraft carburetor air horns. Kit Includes: (2) Filters (2) Zip ties Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Water Block Plate Kit (8 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 8-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Water Block Plate Kit (11 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 11-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Carburetor Jet Kit (High Elevation) This kit is used to make the air/fuel mixture leaner. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean...

Hastings Street Piston Ring Set (92.00mm / Standard) LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with cast iron, barrel face top compression rings. They have conventional cast iron...

Weber 32/36 Jet Kit (High Elevation / Fuel Economy) This kit is used to lean the air/fuel mixture. A properly jetted carburetor that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of...

Front Control Arm Bushings These bushings maintain proper alignment under extreme conditions on and off-road and during competition. Helps provide quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster...

FJ-80 Tie Rod End (RH / LH Thread) Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. These rod ends are greaed for life and sealed. It will include the cotter pin and jam nut. M23 X 1.5 This product should not be used...

Adapter Kit (Aisin 22R Carb to K&N Filter) LC Engineering manufactures custom adapters to match your Aisin 22R carburetor to a K&N or similar flanged air filter. NOTE: Fits any filter with a 5-1/8" mount pattern. Contact our Tech...

Weber 32/36 Jet Kit (Performance) This kit is used to richen the air/fuel mixture. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean fuel...

Pro Connecting Rod Bolt To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...

K&N Air Filter Element (E-2220) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...