2-Bolt Stub Connector
(You Choose Size)
2 1/4" Flange
This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to.
2 1/2" Flange
This...
Merge Collector
(You Choose Size)
You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...
Fuel Injector Cups
(w/ O-Rings)
Fuel Injector Cups and O-Rings for OEM Toyota 2RZ and 3RZ fuel injectors. Located on in the cylinder head for the injectors to sit in. Age and heat will take its toll on these plastic parts. They never come out whole and...
Intake Manifold Gaskets
LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs! This kit contains the...
Garrett T3 Exhaust Discharge Flange
(4-Bolt)
Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe.
Contact our Tech Support Line for...
Rear Seal Gasket Assembly
High-quality silicone seals with a double lip for improved sealing, includes rear main seal & housing gasket.
Contact our Tech Support Line for further information at 928-575-2174.
Note:...
Oil Fitting
(28BSPT to 1/8"NPT Female)
LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...
Street Performer Retainer Set
(Single Spring)
Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the...
Oil Pump Drive Spline
(Single Row)
If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right.
OEM Toyota Part #:...
Weber Gasket Kit
If you just need to freshen up the gaskets on your Weber carburetor, this kit if for you. It does not include any accelerator pump diaphragms or other parts included in a complete rebuild- only the gaskets.
Contact our Tech...
K&N Filter Care Service Kit
(Aerosol / 99-5000)
K&N Recharger Kit 99-5000 is designed to service your K&N oiled cotton air filter when it gets dirty. The kit comes with K&N Power Kleen air filter cleaner and K&N air filter oil. The 99-5000 Recharger...
K&N Sealing Grease
(99-0704)
K&N Sealing Grease 99-0704 provides an airtight fit around sealing surfaces on all types of air filter elements. It resists heat and will not melt or run off. K&N Sealing Grease is designed to ensure the filter stays sealed...