Heat Riser Tubing (1.5" x 36") This heat riser tubing is just what you need if you need to keep the choke plate on your carbureted engine hooked to the exhaust for emissions purposes. This tubing goes from the heat shield on the exhaust manifold to the...

Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...

OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...

Rear Disc Brake Conversion (w/o Parking Brake) We now offer a disc brake kit for your 4WD Pickup and 4Runner! We had three goals in mind. It had to be strong, easy to install, and a complete kit. We think as you read on you will agree that all three...

Solid Axle Vented Rotor Upgrade (Front) This kit is designed to change the solid stock rotors that are found on the front straight axle 1980 to 1985 trucks or SAS using the stock Toyota front axle to the newer vented rotor. Includes the LC Engineering...

Oil Drain Fitting (Weld On -10AN Male) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This Steel fitting gets welded to the oil pan for the oil drain from the turbo. Contact our...

GT25R Turbo Inlet Gasket (Metal) A Stainless Steel inlet gasket for the GT25 turbos that we use in our CT20 conversion kit. For between the turbo manifold and the GT25 turbo or our adaptor and the GT25. Contact our Tech Support Line for further...

T3 Turbo Discharge Gasket (5 Bolt) Stainless Steel T3/T4 Discharge Gasket. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed...

45° Oil Drain Fitting (1/2" NPT Male to -10AN Male) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil drain at the turbo or oil pan. Perfect for going...

Street Distributor Before your engine performance suffers you need a Replacement Distributor. LC Engineering has introduced a new line of distributors that come complete with new cap rotor and electronics. Save money over the OEM price with these all...

Cam Degree Kit Cam degreeing can be a scary procedure if you are not prepared for it. LC Engineering has just made it a lot easier by creating a kit that is designed to work on your 20R, 22R/RE/RET engine. This kit will include a complete universal cam...

Axle C-Clip (Inner) This snap ring goes on the outer stub shaft of your birfield and keeps the birfield from drifting too far into the axle assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are...