1985

Weber 32/36 Jet Kit (High Elevation / Fuel Economy) This kit is used to lean the air/fuel mixture. A properly jetted carburetor that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of...

Air Cleaner Adapter Kit (Weber 32/36/38 Carb to K&N Air Filter) LC Engineering manufactures this adapter from billet 6061-T6 aluminum. This will allow you to use an aftermarket air cleaner on your Weber 32/36 or 38 carburetor. The adapter will go...

Spindle Stud Kit When assembling your spindles gaskets does it feel like your all thumbs? This kit contains (16) studs and flanged nuts. With studs installed it's easier to install the spindle gaskets. Gaskets are placed on the studs one at a time,...

OEM Heater Control Indicator Lens Did your heater control indicator lens break? No problem... OEM factory Toyota unit here! Look into our LCE short shift kits and prevent this from happening again lol. OEM Toyota P/N: 55519-89143 Contact our...

Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are machined from solid billet so you will never have to worry...

OEM Exhaust Gasket OEM gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...

IAC Coolant By-Pass Hose #2 (1985-1995 22RE/REC) LC Engineering is now offering OEM IAC Coolant By-Pass Hoses. Replacing the idle air control coolant bypass hose on the 22RE throttle body may be necessary due to issues such as leakage, age-related...

FJ-80 Tie Rod End (RH / LH Thread) Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. These rod ends are greaed for life and sealed. It will include the cotter pin and jam nut. M23 X 1.5 This product should not be used...

Weber 32/36 Jet Kit (Performance) This kit is used to richen the air/fuel mixture. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean fuel...

Pro Connecting Rod Bolt To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...

K&N Air Filter Element (E-2220) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...

Water Block Plate Kit (8 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 8-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...