1985

Fuel Pressure Gauge (Carbureted 1.5" Diameter 0-10 Psi) These fuel pressure gauges are for carbureted engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable, rust-free, stainless steel bezel and case and...

Fuel Pressure Gauge (1.5" Diameter / 0-60 Psi) These fuel pressure gauges are for EFI engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable, rust-free, stainless steel bezel and case and a crisp,...

Safety Auto Rod Bearing Set When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...

Hall Sensor Mount This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock pulley and the LC Engineering underdrive pulley. This...

OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...

Front Sway Bar Bushings (19mm) Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the greatest improvement in performance handling on trucks and sport utility...

Front Sway Bar Bushings (23mm) Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the greatest improvement in performance handling on trucks and sport utility...

Engine Rebuild Oil Galley Plug Kit Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off after cleaning. LC Engineering can supply you with all these hard to find plugs. Most engines have some sort of...

Shim Pack (Six Shooter Knuckle) Shim pack for 6-shooter knuckles. In order to maintain proper steering geometry and prevent binding or mis-alignment, we offer this assortment of shims. Contact our Tech Support Line for further information at...

PCV Hose This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35030 NOTE: Not for carbureted applications. For carb applications, see Part #: 1072413 (1984 only), or Part #: ...

Pinion Head Bearing The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for these Celica rear ends. This is the bearing that rides on the...