Denso 7mm Spark Plug Wires (Black) We realize not every engine is a race engine. Don't overspend on features that you can't use. Denso uses the highest quality spark plug wire in the industry. All silicone, Class E jacket construction endures...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Timing Cover Hardware (Single Chain Kit) This kit is all the hardware you will need for the installation of the late model Timing Chain Cover in most applications. All hardware is zinc plated, or black oxide coated. NOTE: This kit will not address any...

Front Axle Torque Arm Bushings Stock rubber bushings are subject to the same deterioration problems as other rubber products. This causes control problems associated with road wander. Gain additional handling by replacing your rubber bushings with...

Throttle Body Rebuild Kit Have an old worn out throttle body? Well, you are in luck! We have developed this kit that includes a new throttle body gasket, new shaft seals, and LC Engineering's own idle speed screw so you can rebuild yours. Call and...

Power Steering Belt (1981 - 1995) Pickup & 4Runner 22R/RE/RET This high Performance V-Belt is designed with being a workhorse in mind, the polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The...

OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...

Gasket Set (Timing Chain Cover) High-quality timing cover gasket set for (85-95) 22R and 22RE engines. Does not fit early (75-84) blocks, for those engines, use Part #: 1015045. Contact our Tech Support Line for further information at...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...

2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...