Air Intake Tube Clamp Need to connect the air intake duct and secure it properly? Simply get these clamps into place, and snug it down. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

Fuel Union / Banjo Bolts This fitting will be used on both sides of the 22re fuel filter. OEM Toyota Part #: 90401-12097 NOTE: The threads of these fittings are metric M12 x 1.25. Contact our Tech Support Line for further information at...

Oil Drain Plug (Small) The LCE 20R/22R small oil drain plug is manufactured from high-quality materials to handle the most challenging conditions. LCE drain plugs and gaskets are the quality parts you need to do your job right. The head is 14mm, and...

Weber Carburetor Internal Fuel Filter Found on the underside of the Weber Carb (32/36 and 38 models) is an internal fuel filter that a lot of people overlook. If you have any fuel issues or contaminants found in your fuel system, be sure to replace...

Air Filter Base Gasket Avoid or fix annoying air leaks by replacing the base gaskets between your carburetor and air cleaner. We recommend these gaskets to be in place so the carb is not exposed to dust and dirt coming into the engine. Contact...

Weber Main Jet (1.25) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We recommend Weber...

Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...

Wristpin Locks (.866" Diameter) This set of wrist pin locks is what is required to hold your connecting rod wrist pins in place. These are essential pieces that should not be overlooked. Always replace wrist pin locks when refreshing your motor...

Replacement Gasket Kit (Pro Spiral Adapter) Replacement gasket kit for our LC Engineering Pro Spiral Adapter for Weber carburetors. Prevent vacuum leaks after disassembling an adapter. NOTE: These gaskets are used with our spiral adapter...

Tie Rod Boots (Pair) At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! These boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber...

PCV Valve (Plastic) This replacement plastic PCV valve is perfect for those that are running aftermarket carburetors such as the Weber 32/36 or 38. The 90 degree PCV makes for a better transition when plumbing your manifold on these applications...

Teflon Base Gasket Teflon heat isolators keep the power-robbing heat away from the intake air. This is the ultimate for improving mileage and performance for the price. Contact our Tech Support Line for further information at 928-575-2174...