Crankshaft Key (Woodruff Key) Crankshaft keys (also called woodruff keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...

Crankshaft Scraper (Full Perimeter) During regular engine operation, a significant amount of oil adheres to or becomes entrained in, a cloud surrounding the spinning bottom end. This oil eats up the horsepower your engine is making by increasing the...

Large Oil Galley Plug (3/8"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two, one goes in the front of the block, and one goes in the rear of the block. LC Engineering...

Medium Oil Galley Plug (1/4"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need four of these for the crankshaft and one for the inside of the block under the oil filter...

Small Oil Galley Plug (1/8"-28 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two for the passenger side of the block. LC Engineering can supply you with all these hard to...

Pro Stroker Crankshaft LC Engineering's stroker cranks are first sent through our inspection department to find any imperfections. After they pass the initial evaluation, they are Magnaflux inspected to verify the condition of the core. The crank is...

LC Engineering Street Crankshaft (+.010" Main / +.010" Rod) LC Engineering is proud to present our new Street Performer Crankshafts. We have spent years chasing core crankshafts to rework to our street performer crankshaft needs, But now we have taken...

Seal Saver (Rear Main) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank and...

Main Stud Set ARP main studs are manufactured from 8740 chrome-moly steel, heat-treated in-house, 200,000 psi tensile strength and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger. All kits come...

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Oil Drain Plug Gasket (Large) This is the oil drain plug gasket for LC Engineering's large oil drain plug Part #: 1013114. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Oil Drain Plug Gasket (Small) This is the oil drain plug gasket for LC Engineering's small oil drain plug Part # : 1013117. OEM Toyota Part #: 90430-12031 Contact our Tech Support Line for further information at 928-575-2174. Note:...