High Pinion Conversion Kits W/ Gear Choices Now building and running a High Pinion differential is so affordable, we have put together a conversion kit that will allow you to use your current V6 locker with our complete High Pinion conversion kits,...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

26" Extended Brake Line Kit (2 Front / 1 Rear) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...

Rear Disc Brake Pads Semi-metallic replacement brake pads for your Pickup or 4Runner rear disc brake kits. NOTE: These brake pads are only used as a replacement for our kit, see Part #: 1055202. Contact our Tech Support Line for further...

Single Wire O2 Sensor Relocation kit If your O2 location has moved due to an aftermarket header, this single wire kit will extend the lead on your current connection. Contact our Tech Support Line for further information at 928-575-2174...

22R Weber 32/36 Carburetor Performance Package (Electric Choke) Kit Includes: Weber 32/36 Carburetor, see Kit Part #: 1030021 Fuel Pressure Regulator Gauge Kit, see Part #: 1035055 Spiral Adapter (Weber to 22R Stock Manifold), see Part #:...

+3.5" Lift Kit w/ Shocks (Fabtech) This 3.5″ Performance System for the Toyota pickup utilizes Fabtech heavy-duty upper control arms to achieve front lift and add-a-leafs bring up the rear. Finishing off the suspension kit is front and rear, twin...

Longfield 30-Spline 4340 Chromoly Super Set (Birfield) With larger tires and more horsepower being used on the trails these days, upgrades to your axle are more critical than ever. In a Toyota, one of the common failures are the stock 27-spline...

Stock Valve Guides (OE) When it comes to replacing valve train components, most people don't even think about the valve guides. If you have a high mileage engine or have bent a valve, it is most likely that your valve guides are damaged, we now offer...

Heater Tube O-Ring (Under EFI Manifold) The O-ring seals the heater tube under the EFI intake manifold. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. This is OEM toyota part and may not...