-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...

2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...

Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...

Fuel Injector Cups (w/ O-Rings) Fuel Injector Cups and O-Rings for OEM Toyota 2RZ and 3RZ fuel injectors. Located on in the cylinder head for the injectors to sit in. Age and heat will take its toll on these plastic parts. They never come out whole and...

Water Bypass Hose LC Engineering is now offering an OEM water bypass hose. OEM Toyota Part #: 16261-35030 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Intake Manifold Gaskets LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs! This kit contains the...

Toyota Grille Badges (Pickup & 4Runner) Ever since we created the Project 85' grill badge, customers have been requesting something for their own vehicles as well. We're excited to present the first run of these new badges, offered in two...

Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...

Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing. Includes OEM rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...