1991

Valve Adjuster Nut (OEM) New OEM Toyota valve adjuster nuts can play a considerable role when rebuilding your cylinder head, adding a new camshaft or other new valve train components. A small investment to keep your motor running strong. OEM Toyota...

Pick Up Tube Gasket (Oil Pan) This gasket seals the oil pickup to the block. Guarantees the oil makes it into the pump instead of leaking back into the pan. OEM Toyota Part #: 15147-38020 Contact our Tech Support Line for further information at...

Air Injection Gasket The air injection gasket goes between the header flange and the air injection tubes. This gasket is also used with our air injection block plate, see Part #: 1045000. NOTE: (2) required per vehicle. Contact our Tech Support...

OEM Vent Hose Spring Clamp Need to connect the vent hose and secure it properly? Simply get these spring clips into place, and release. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

Holley Base Gasket Avoid annoying vacuum leaks and replace the gasket any time you remove the carburetor from the intake. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Idle Jet Holder O-Ring These O-Rings seal the idle jet holder to the main carburetor housing. O-Rings can become brittle with age and cause annoying (and dangerous) fuel leaks. NOTE: O-Rings sold individually. Contact our Tech Support Line for...

Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...

Valve Keeper It is recommended to use hardened valve keepers every time you rebuild your engine. LC Engineering carries hardened valve keepers for all 3VZ valves using stock Toyota retainers or Street Performer retainers. A must for any high RPM...

Exhaust Collector Gasket (2 1/4" / 3 Bolt) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive seal. 3-bolt...

Large Oil Galley Plug (3/8"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two, one goes in the front of the block, and one goes in the rear of the block. LC Engineering...

Thermostat Housing Gasket (Paper / Flat) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a paper gasket that offers an excellent seal for your thermostat housing...

T-stat Housing Adapter O-Ring (Offenhauser Manifolds) If you are running an Offenhauser intake manifold you are most likely using our thermostat housing adapter with a late style water neck. The adapter has its own O-ring (other than the one around the...