Stainless Steel U-Bend (2 1/2") LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of stainless steel that we use in our Pro Flow exhaust systems...

Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for transferring the clutch pedal pressure hydraulically to the...

Throttle Body Gasket (Paper "O" Shape) Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. On the 3.4...

Throttle Body Extension (40mm) Use these extensions to provide a mounting surface for an air filter baseplate, beyond the fuel rails on 2900, 2930 and 3000 series throttle bodies. These components can also be used to extend the effective length of an...

Throttle Position Sensor (Sidedraft) Throttle position sensor for converting to sidedraft throttle body injection. If you would like to connect it to the wiring harness, see Part #: 1061095. NOTE: This throttle position sensor will not mount or...

Throttle Position Sensor Plug (Sidedraft) This plug is only to be used with sensor, see Part #: 1061090, and is for the individual fuel injection throttle body set up that we sell, see Part #: 1061100. NOTE: This throttle position sensor plug will...

Air Temp Sensor (â"¦Å“″ NPT) Air Intake Temperature sensor for use with our Pro Fuel Injection systems. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Coolant Temp Sensor This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector. Contact our Tech Support Line for further information at...

Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...

PCV Hose This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

OEM Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...

IFS Eliminator Kit (Left Hand / 5" Springs / 4-Stud) There are a lot of choices on the market for solid axle conversion. So what makes our kits stand out? We feature the highest quality parts and the most complete kit at the best price anywhere. Our...