1993

Heat Riser Tubing (1.5" x 36") This heat riser tubing is just what you need if you need to keep the choke plate on your carbureted engine hooked to the exhaust for emissions purposes. This tubing goes from the heat shield on the exhaust manifold to the...

Denso 5mm Spark Plug Wire Set (22R/RE/RET 1993-1995) Looking to replace your wires but don't need the "Performance" style? These would be the ones to choose. Denso is a leading name in replacement auto parts. Features: Mfr Label: 5mm Spark Plug Boot...

OEM Clutch Release Fork Sub-Assembly OEM Toyota OEM Clutch Release Fork Sub-Assembly. OEM Toyota Part #: 31204-35031 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Coil Adapter Wire Special coil wire to connect a (93-95) coil to our pro distributor cap. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Clutch Slave Cylinder The clutch slave cylinder is typically located on side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch. One...

Street Performer Retainers Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain, these retainers...

T3 Inlet Turbo Flange (4-Bolt) This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange. Don't see what you need? Just call our Technical Dept...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Timing Chain Tensioner Need to replace your chain tensioner and don't need the entire kit? LCE has you covered! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Street Performer Retainer (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...

IAC Coolant By-Pass Hose #1 (1985-1995 22RE/REC) LC Engineering is now offering OEM IAC Coolant By-Pass Hoses. Replacing the idle air control coolant bypass hose on the 22RE throttle body may be necessary due to issues such as leakage, age-related...

Weber Rebuild Kit LC Engineering carries the rebuild kits to bring your Weber carb back to life. Kits include gaskets, O-rings, needle & seat, and accelerator pump diaphragm, needed to restore your Weber 32/36 carb back to like-new condition...