1994

Water Bypass Hose LC Engineering is now offering an OEM water bypass hose. OEM Toyota Part #: 16261-35030 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing, includes  rear main seal & housing gasket.       Contact our Tech Support Line for further information at 928-575-2174.   Note:...

Coolant Temperature Sensor (Square Plug) This Temperature Sensor is a stock replacement for 22RE engines. After years of use, electronic components can go bad and give false readings, that is why we recommend replacing them with new ones for accurate...

Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...

Intake Manifold Gaskets LC Engineering offers the best quality gaskets possible for your Toyota engine. Over time, the factory gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs! This kit contains the...

Fuel Pressure Bolt Kit Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel bolt kit is the solution to the problem. This kit will replace the banjo bolt on the cold start...

Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...

Rear Track Arm Bushing These Energy Suspension performance polyurethane torque arm bushings reduce wheel hop on acceleration, shudder during braking, and adds greater handling control. These are a must when using larger tires and horsepower upgrades...

Street Performer Retainer Set (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the...

Oil Pump Drive Spline (Single Row) If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right. OEM Toyota Part #:...

Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...

Fuel Pressure Gauge (Carbureted 1.5" Diameter 0-10 Psi) These fuel pressure gauges are for carbureted engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable, rust-free, stainless steel bezel and case and...