1994

Weld On Bung & Plug Kit (Thread-In Bosch Style) If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge, you will need this kit. It comes with the bung (18mm...

OEM Radiator Fan Shroud Clip (1979-1998 4Runner/Pickup/Celica/Tacoma/T100) OEM Radiator Fan Shroud Clip. OEM Toyota Part #: 90468-06013 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Wheel Bearing Nut Kit (Front Hub) Normally the nuts that hold the wheel bearings can be reused over and over again. If your wheel bearing retainer nuts need replacing this kit is for you. Kit Includes: (2) Nuts (1) Star Washer (1) Flat Index...

OE Valve Cover Gasket Set This is a OE replacement 3VZ valve cover gasket set. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product...

Rear Frame Shackle Bushings (4 Bushings) For high-performance applications, the combination of heavy-duty or performance leaf springs and performance polyurethane spring bushings deliver the maximum benefit. For lighter-duty leaf springs they add a...

Valve Shim (2.20mm - 2.55mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines, the cam rides directly on the shim on stock buckets. Our...

Valve Shim (2.60mm - 2.95mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines, the cam rides directly on the shim on stock buckets. Our...

Valve Shim (3.00mm - 3.40mm) Street valve shims are used to shim the valve lash to obtain the proper valve lash specification that is required for the appropriate camshaft grind. On 3VZ engines, the cam rides directly on the shim on stock buckets. Our...

Heavy Duty Shifter Seat (Blue) It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose t-case shifter. The factory seat is soft so it can be squeezed into position. These...

Fuel Pump Spacer (Mechanical Fuel Pump) This black plastic spacer installs between the manual fuel pump and the cylinder head. The spacer is needed to properly mount the fuel pump to get the correct stroke off the camshaft. Contact our Tech...

Thrust Bearing Set (Standard) These bearings for the 5VZ and 3VZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on any...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...