-
Intake Valve (Steel / Stock Size 44.5mm) If you're looking for replacement valves for your Toyota 22R/RE/RET engine, then these high-strength steel OE type replacement valves are just right for you. These valves utilize the factory size valve seats and...$7.55 -
Pro Bronze Valve Guide (Exhaust Side) Valve Guides are made of the highest quality manganese bronze material available. This provides additional clearance between the retainer and seal for increased valve lift. Valve Guides provide excellent stability...$7.52 -
Hose Clamp (Water Bypass Hose) Need to connect the water bypass hose and secure it properly? Simply get these clamps into place, pull the retainer clip, and you are all set! Nothing makes a job easier than having the proper tools. Look no further, LC...$7.51 -
OE Breather Hose (Front Of Valve Cover) OE Toyota hose comes off the valve cover and goes to intake manifold. Replaces OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part...$7.50 -
Throttle Body Gasket (Metal "D" Shape) Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is...$7.45 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...$7.45 -
OE Knuckle Stud Factory Toyota knuckle hardware. Don't let knuckle stud failure ruin your day, get the best. NOTE: Sold Individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$7.43 -
OE Knuckle Cone Washer Factory Toyota knuckle hardware. Don't let knuckle stud failure ruin your day, get the best. NOTE: Sold Individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$7.43 -
Viton Valve Seals (Stock Guides) Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold...$7.28 -
Pro Bronze Valve Guide (Intake Side) Valve Guides are made of the highest quality manganese bronze material available. This provides additional clearance between the retainer and seal for increased valve lift. Valve Guides provide excellent stability...$7.17 -
Offenhauser Water Plate Gasket (11 Bolt) Replace a leaky or corroded water plate gasket with high-quality LC Engineering gaskets and seals. OEM Toyota Part #: 16347-35050 NOTE: This is the gasket used in our Offenhauser Water Plate Kit...$7.16 -
Offenhauser Water Plate Gasket (8 Bolt) Replace a leaky or corroded water plate gasket with high quality LC Engineering gaskets and seals. OEM Toyota Part #: 16347-35011 NOTE: This is the gasket used in our Offenhauser Water Plate Kits...$7.16
-
fast shipping
Speed Delivery