-
MSD Tach Adapter If you are using the magnetic pickup input (green and violet wires) to trigger your Fast Ignition or MSD Ignition, you will need the PN 8920 Tach Adapter. This adapter will correct the operation of most voltage-triggered tachometers...$100.53 -
Power Steering Pump Bracket Kit (Rock Assault) This pump bracket is designed to adapt our "TC" style power steering pumps to your 75-95 Toyota 20R/22R/RE/RET engine. This bracket will utilize the stock idler pulley for the power steering belt. NOTE:...$100.37 -
OE Motor Mounts Over time, the rubber can start to deteriorate and fall apart due to the constant stress from the motor torque. Contamination from grease and oil can accelerate the deterioration process. These OE mounts are a direct replacement for...$99.95 -
Water Outlet Pipe (OEM Heater) Don’t get stuck with an overheated engine due to a failed Heater Outlet Pipe. The solid metal construction of this OEM Toyota pipe will keep you going for another 20+ years! This is for the exhaust side, for heater...$99.93 -
ULTIMATE Lift Hood Strut Kit (93-98 T100) Our new ULTIMATE Lift Hood Strut Kit for the ’93-98 T100 eliminates the prop rod and makes your engine compartment free and clear of obstacles. One-handed hood opening and closing â€" the struts lift...$99.86 -
OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...$99.76 -
1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...$98.89 -
Pro Fuel Map Sensor (SDS) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up to...$98.83 -
Pro Dual Valve Springs The Pro Dual Valve Springs are a "must-have" upgrade when running cam lift over .455" or when sustaining a constant 5,000rpm or higher. With 100lbs of seat pressure and open pressure of 210lbs (at .500" lift) they will work...$98.61 -
DJM Steel Lowering Block Kit (4" Rear) All steel block kits for those who have souped up your rides! Of Course they have new U-bolts, nuts and washers! Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$98.26 -
Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...$98.25 -
Carburetor Rebuild Kit (Aisin / Stock) Don't get rid of your carb. Chances are it just needs to be rebuilt. This kit comes complete with everything you need to freshen up and rebuild your 22R Aisin 2-Barrel Carburetor for race, off-road or street use...$98.25
-
fast shipping
Speed Delivery