1995

OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...

Pro Dual Valve Springs The Pro Dual Valve Springs are a "must-have" upgrade when running cam lift over .455" or when sustaining a constant 5,000rpm or higher. With 100lbs of seat pressure and open pressure of 210lbs (at .500" lift) they will work...

DJM Steel Lowering Block Kit (4" Rear) All steel block kits for those who have souped up your rides! Of Course they have new U-bolts, nuts and washers! Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...

Carburetor Rebuild Kit (Aisin / Stock) Don't get rid of your carb. Chances are it just needs to be rebuilt. This kit comes complete with everything you need to freshen up and rebuild your 22R Aisin 2-Barrel Carburetor for race, off-road or street use...

Steering Box Mount /Reinforcement (IFS Steering Box) If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing edges prevent frame cracking. Heavy duty design with a...

16" Flex Fan (Blue) Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex...

Wear Pad Only (9.5") Wear Pad Only - 2RZ(For LCE Aluminum Flywheel Only)(9.5")This goes to a discontinued product, don't order this unless you know that you need it. Contact our Tech Support Line for further information at 928-575-2174. Note:...

Street Performer Valve Springs The proper set of matched valve train components will eliminate most valve train problems. The LC Engineering Street Performer Valve Springs fit in the stock spring pockets and install with all of the stock valve train...

K&N Air Filter Element (E-2605-1) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...

K&N Replacement Air Filter (33-2064) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...

K&N Replacement Air Filter (33-2054) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...