1995

Power Steering Pump Bracket Kit This power steering pump brackets is designed for the TC style power steering pumps and include all applicable hardware. NOTE: 5VZ 3.4L, kits require different hardware to install 1450 PSI pump than 1650 PSI pump. Kits...

DJM Lowering Steel Block Kit (3" Rear) The hot set up for the rear of small and mid-size pick ups plus suv's where the axle is on top of the leaf spring is the good old lowering block kits. All kits have new U-bolts, nuts and washers! Contact our...

Carbureted Fuel Pump (3-5 Psi) This pump will maintain performance with carburetors for all street performance and off-road applications. This fuel pump will meet the performance demands of dual or single carburetor applications. This is an electric...

Boost Sensor (F.A.S.T. Ignition) This 2 Bar MAP (Manifold Absolute Pressure) sensor, is used as boost sensor for boost proportional retard with TRC-2, see Part #: 1082022. Contact our Tech Support Line for further information at 928-575-2174...

OEM Water Temperature Sensor EFi (4Runner/ Pickup/Celica/ Tundra) OEM Water Temperature Sensor EFi. OEM Toyota Part #: 89422-20010 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Oil Pump Rotor Set Replacement oil pump rotor set for the 2RZ oil pump. If the rotors on your stock oil pump are worn out, this set will cure the problem. OEM Toyota Part #: 15103-75010 NOTE: For 2RZ/3RZ Oil Pump Cover Allen Head Hardware Upgrade...

Gauge Pillar (Triple) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil pressure,...

Throttle Body Spacer Kit Our throttle body spacers feature a unique spiral bore that agitates the incoming air to promote better atomization of the fuel molecules, resulting in a more complete burn in the combustion chamber. These kits include a...

Throttle Body Spacer Kit Our throttle body spacers feature a unique spiral bore that agitates the incoming air to promote better atomization of the fuel molecules, resulting in a more complete burn in the combustion chamber. These kits include a...

Throttle Body Spacer Kit Just like our spacers for the 22RE and the 2RZ/3RZ, these spacers for the 5VZ V-6 feature our unique spiral bore to promote the tornado-like intake charge. Another added benefit on the 5VZ is the elimination of the gasket...

Water Pump Pulley (Stock Size 4 3/4") This polished water pump pulley is the same size as a stock pulley (4 3/4"). This pulley is perfect for a low RPM application like rock crawling since it does not slow the water pump down as our underdrive pulleys...

Differential Drop Spacer Kit (w/ Sway Bar) One thing often overlooked when lifting an IFS truck is the differential and axles. Most larger lifts will drop the differential down with brackets, but with smaller lifts (torsion bar lift, ball joint spacer...