1995

22R/RE Valve Cover Billet Insert Looking to spice up the engine bay of your 22? This should do the trick. Choose between (3) different lettering choices. Adhesive backing will be applied to the back of the insert prior to shipping. Contact our...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

S&B Intake Replacement Filter (KF-1022) This is a replacement filter made for S&B's CAI for 1988-1995 4Runner with a 3.0L. Measurements are provided in case it may fit your custom application. S&B's filters are made with silicone in all the...

Exhaust Gaskets (LH & RH) LC Engineering also offers gaskets for your Toyota V-6 motor. Just like with our 22R/RE headers, we prefer to use the factory style stainless steel exhaust gaskets. Toyota got it right when they used MLS (Multi-Layer...

Pro Bronze Valve Guide Set Valve Guides are made of the highest quality manganese bronze material available. This provides additional clearance between the retainer and seal for increased valve lift. Valve Guides provide excellent stability so they can...

K&N Replacement Air Filter (33-2050-1) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase...

OEM Thermostat Housing (1982-1995) OEM Thermostat Housing. OEM Toyota Part #: 16331-35041 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Trail Gear Rock Ripper Air Filter 8.8" (Replacement) This is the replacement air filter for the Tacoma 3.4Liter Extreme Rock Ripper Air Filter 8.8" kit, This filter is interchangeable with K&N filter RU-3050. NOTE: For the precharger for this...

Upper Ball Joint (Tacoma / 4Runner / Tundra / Sequoia) The front upper ball joint assembly is an essential component in the front axle arm & steering knuckle system of your Toyota vehicle. This part plays a key role in ensuring smooth and stable...

Holley Fuel Pressure Regulator (1-4lbs) The regulator's job is to keep the pressure in the fuel system at a constant psi (Weber carbs work best in the 2.5-3psi range). Your fuel pressure regulator controls the amount and speed at which fuel is used by...

Connecting Rod Bolt To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the stock rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Rod...

Speedometer Extension Cable When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedometer cables to a dual adapter. This product should...