+4" Rear Lift Kit The 95-04 Tacoma Rear Lift Kit is complete, easy to install, and durable. Using your stock Tacoma axle housing, our lift kit, along with the easy to use full color instructions, you can be on the road within a few hours with a 3, 4,...

+5" Rear Lift Kit The 95-04 Tacoma Rear Lift Kit is complete, easy to install, and durable. Using your stock Tacoma axle housing, our lift kit, along with the easy to use full color instructions, you can be on the road within a few hours with a 3, 4,...

Single Transfer Case Crossmember Our Rock Defense Tacoma Single T-Case Crossmember fits 95-04 single t-case, automatic and manual transmissions, and uses your stock t-case mount. The kit can be mounted either by drilling the frame and bolting the...

OEM Main Bolt (Cam Bolt) This is a brand new OEM Toyota main bolt. Ironically this is the same bolt used to hold the cam gear and distributor drive gear onto the front of the cam. Quantity 10 used for crank main caps.OEM Part #:...

Oil Pan Hardware Kit (Silicone Seal) This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with silicone seal pans only. This kit will not work with gasket...

Street Piston Set w/ Rings (95.75mmn / +.030") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (96.00mm / +.040") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (95.75mm / +.030") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (96.00mm / +.040") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Timing Cover Hardware (Single Chain Kit) This kit is all the hardware you will need for the installation of the late model Timing Chain Cover in most applications. All hardware is zinc plated, or black oxide coated. NOTE: This kit will not address...

OEM Water Pump Gasket Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...