1995

Holley Fuel Pressure Regulator (1-4lbs) The regulator's job is to keep the pressure in the fuel system at a constant psi (Weber carbs work best in the 2.5-3psi range). Your fuel pressure regulator controls the amount and speed at which fuel is used by...

Connecting Rod Bolt To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the stock rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Rod...

Speedometer Extension Cable When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedometer cables to a dual adapter. This product should...

Sidedraft Carburetor Velocity Stacks (Air Horns / Shorty) Velocity Stacks or "Air Horns" allow smooth and even entry of air at high velocities into the intake tract, and replaces the ducting from the air-box (on EFI applications) providing a cleaner...

OEM Upper Ball Joint Sankei 555 When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest. This is the same ball joint Toyota used on Tacomas back in the days, so...

Water Pump When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. These are all new OEM quality Japanese-manufactured pumps. The gasket is included with the pump. Contact our Tech Support...

Denso 5mm Spark Plug Wires Denso uses the highest quality spark plug wire in the industry. All silicone, Class E jacket construction endures temperatures from -40 to 428 degrees Fahrenheit. OE identical end caps click into place for easy installation...

NGK Spark Plug Wires (w/ Large Terminal Ends on Cap) We realize not every engine is a race engine. Don't overspend on features that you can't use. The NGK spark plug wires are perfect for the street were high RPM's are not sustained and upgraded...

OE Lower Ball Joint When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest, OE replacement. This is the same ball joint Toyota used on Pickups and & 4Runners back...

Timing Belt Adjuster (Hydraulic) This is a new OEM pressurized timing belt tensioner for the 5VZ V6. It is recommended to replace both the Belt Tensioner and timing belt together. OEM Toyota Part #: 13540-62021 Contact our Tech Support Line...

OE Upper Ball Joint When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest, OE replacement. This is the same ball joint Toyota used on Pickups and & 4Runners back in...

Hastings Street Piston Ring Set (88.25mm / +.030") LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with ductile iron, plasma moly top compression rings. They have conventional cast iron...