Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...

Fuel Pump Relay Fuel pump Relay for Pro Fuel Injection Kits. Required for the computer to turn on the electric fuel pump. Much easier than having an additional switch on the dashboard! Contact our Tech Support Line for further information at...

Knock Sensor Upgrade This is for the upgrade for the newest Pro Fuel Kits using the SDS computer. The upgrade will come with the Knock Sensor and adapter. Knock control allows the ECU to retard the ignition timing automatically if knocking is detected...

Hall Sensor Mount When installing our LC Pro Fuel Injection System on a 2RZ or 3RZ, this bracket mounts the Hall Effect Sensor perfectly to generate a signal from the crank pulley. Contact our Tech Support Line for further information at...

Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system. NOTE: Sold...

Fuel Injector Isolators (Bottom) To isolate injectors in the stock intake manifold LC Engineering suggests changing these when rebuilding the engine or when servicing the fuel injectors. LC Engineering flow-matched fuel injectors include new isolators...

Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...

Fuel Injector Cups (w/ O-Rings) Fuel Injector Cups and O-Rings for OEM Toyota 2RZ and 3RZ fuel injectors. Located on in the cylinder head for the injectors to sit in. Age and heat will take its toll on these plastic parts. They never come out whole and...

Garrett T3 / T4 Hybrid (Pro Turbo / Low Boost) The Garrett T3/T4 Hybrid turbo is the best of both worlds! The low inertia and fast boost response of the lightweight T3 turbine wheel combined with the high airflow characteristics of the T4 compressor...

Garrett T3 / T4 Hybrid (Pro Turbo / High Boost) The Garrett T3/T4 Hybrid race turbo is the next step up from our street turbo. These high-boost turbos share the same low inertia and T3 turbine wheel and T4 compressor to make this the best choice for...

2.75" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for Turbo Intercooler or Air! Dress up your engine compartment by replacing your air lines with the highest quality silicone hose available! Full vacuum through the...

2.00" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...