1997

Air Conditioning / Fast Idle Solenoid This solenoid can be used for one of two options; A/C or Fast Idle. The Fast Idle/ A/C Solenoid does not require an additional valve. The fast idle option consists of extra circuitry added to the ECU, a control...

Main Bearing Set Coated (Standard) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with...

Wear Pad Only (9.5") Wear Pad Only - 2RZ(For LCE Aluminum Flywheel Only)(9.5")This goes to a discontinued product, don't order this unless you know that you need it. Contact our Tech Support Line for further information at 928-575-2174. Note:...

MSD Tach Adapter If you are using the magnetic pickup input (green and violet wires) to trigger your Fast Ignition or MSD Ignition, you will need the PN 8920 Tach Adapter. This adapter will correct the operation of most voltage-triggered tachometers...

+2" Rear Add-A-Leaf (Fabtech) Most add a leafs are known for being stiff and hard to install. Well not anymore. Fabtech has taken modern thin leaf technology and incorporated it into their smooth ride add a leaf kits, allowing for effortless...

Frame Reinforcement Kit (Front) No matter if you are pre-running, rock crawling, or just mall crawling, your 95 1/2 to 2004 Tacoma frame is a weak link in an otherwise tough and dependable truck. The portion of your frame from the door to the front...

OE Motor Mounts Over time, the rubber can start to deteriorate and fall apart due to the constant stress from the motor torque. Contamination from grease and oil can accelerate the deterioration process. These OE mounts are a direct replacement for...

ULTIMATE Lift Hood Strut Kit (93-98 T100) Our new ULTIMATE Lift Hood Strut Kit for the ’93-98 T100 eliminates the prop rod and makes your engine compartment free and clear of obstacles. One-handed hood opening and closing â€" the struts lift...

OEM Connecting Rod Bolt To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These rod...

Street Tune-up Kit A tune up kit that won't break the bank for your 2RZ or 3RZ from LC Engineering. Give your 95-97 2RZ/3RZ an ignition tune up with our kit that includes four NGK spark plugs BKR5EYA, a set of NGK Spark Plug Wires, distributor cap...

DJM Steel Lowering Block Kit (4" Rear) All steel block kits for those who have souped up your rides! Of Course they have new U-bolts, nuts and washers! Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...