OEM Shifter Boot (Manual Transmission) It's common for the factory shift lever boot to degrade over time, crumble and disintegrate. This often results in dirt and mud getting into the transmission shifter then into the transmission. This simple rubber...

1/2" Pushlock To -8AN (45 Degree Swivel AN Fitting) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil drain at the turbo or oil pan. Perfect for going...

Oil Filter Housing Seal Kit (OEM) When removing the oil filter housing, it is always a good idea to replace these two O-ring seals. Any leak in this area can contaminate the system and affect oil pressure, not to mention the mess in the engine...

K&N Air Filter Cleaner (99-0606) K&N Air Filter Cleaner is the only cleaner recommended to clean K&N cotton air filter elements. The 99-0606 Air Filter Cleaner will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to...

K&N Air Filter Oil (99-0533) K&N 99-0533 is an 8 ounce squeeze bottle of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air...

Oil Fitting (28BSPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block. This is a steel fitting that will come in a silver or...

Intake Valve (Steel / Stock Size 37.5mm) These are replacement steel valves for use on the stock seats. Perfect for stock applications where an oversized stainless steel valve is not needed. These are OEM quality steel valves that are the stock size...

Exhaust Valve (Steel / 30.5mm - Stock Size) These are replacement steel valves for use on the stock seats. Perfect for stock applications where an oversized stainless steel valve is not needed. These are OEM quality steel valves that are the stock...

5/8" High Temperature Hose (Order By The Foot) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 5/8" hose is perfect as an oil drain line for your turbocharger. Sold by the foot if...

Pressure Plate Bolt Pressure plate bolts play an important role in the performance and safety of race cars and street machines alike. That's why LC Engineering recommends replacing yours whenever you change your pressure plate. OEM Toyota Part #:...

Weld-On Oxygen Sensor Flange (2-Bolt Flange Style) This flange is made from 3/8" mild steel, then tapped for M8 x 1.25 studs weld on. For the 2 bolt style O2 sensor. NOT for thread-in O2 sensors. Contact our Tech Support Line for further...

Intake Manifold Stud Kit This kit comes with all new studs to mount your manifold to your cylinder head. Replacing your stock intake bolts with studs will allow you to remove and reinstall your manifold numerous times without having to worry about...