NGK Spark Plug R5671A-9 (18-30 Psi / 14:1+ Comp) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage...

NGK Spark Plug R5671A-10 (30+ psi of Boost) NGK's V-grooved center electrode moves the spark to the outer edge of the electrode for improved ignitability in all combustion chamber conditions. This configuration is especially helpful for throttle...

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

Front CV Axle Replacement front axle shaft. NOTE: Will not work with manual locking hubs. Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Wheel Bearing Nut Kit (Front Hub) Normally the nuts that hold the wheel bearings can be reused over and over again. If your wheel bearing retainer nuts need replacing this kit is for you. Kit Includes: (2) Nuts (1) Star Washer (1) Flat Index...

Fan Blade (Replacement) This is a single fan blade replacement for the 2RZ/3RZ/5VZ (95-04) Dual Electric Fan. Save yourself from replacing the entire fan assembly due to a chipped or damaged fan blade. NOTE: Sold individually. If you need the fan and...

16" Flex Fan (Blue) Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex...

3″ Billet Spacer (Flex Fan) This Flex Fan Spacer Kit has all the additional parts you need to install a 2RZ/3RZ/3VZ Flex Fan. This spacer is made from billet aluminum. Contact our Tech Support Line for further information at 928-575-2174...

Flex Fan w/ Billet Spacer Kit Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas...

OE Motor Mounts Over time, the rubber can start to deteriorate and fall apart due to the constant stress from the motor torque. Contamination from grease and oil can accelerate the deterioration process. These OE mounts are a direct replacement for...

1 3/4" Radiator Cap (Small) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the small one that...

2 1/4" Radiator Cap (Large) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the large one that...