Oil Pan This is a replacement oil pan for your Toyota Tacoma and 4Runner. Replacement for OEM Toyota Part #: 12101-75050 NOTE: This pan will use this drain plug. Contact our Tech Support Line for further information at 928-575-2174...

Turbo Piston Ring Set (96mm / +.040") All of LC Engineering's forged pistons now come standard with gas nitride ring sets. These rings were developed originally for boosted applications (turbochargers and superchargers). However, when applied to our...

Street Piston Set w/ Rings (95.00mm / Standard) Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (95.50mm / +.020") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (95.00mm / Standard) Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Street Piston Set w/ Rings (95.50mm / +.020") Hypereutectic Pistons LC Engineering carries a full line of Street series Hypereutectic pistons for whatever engine you have. The Hypereutectic process allows for a much stronger piston that will not...

Supercharger Pulley (70mm / Smog Legal) Our 3RZ smog-legal superchargers feature a smaller 70mm pulley to reduce the boost down to approx. 4.5 psi. This pulley size is required for CARB exemption (smog legal) on 95-01 3RZ 2.7L Superchargers...

Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator Kits keep the power-robbing heat away from the intake air. This is the ultimate for improving mileage and performance for the price. Installs between the throttle body and intake...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Throttle Body Spacer Kit Just like our spacers for the 22RE and the 2RZ/3RZ, these spacers for the 5VZ V-6 feature our unique spiral bore to promote the tornado-like intake charge. Another added benefit on the 5VZ is the elimination of the gasket...

Fuel Injector Top Grommets This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets. NOTE: Sold as a set of (4). Contact our Tech Support Line for...

Blow Off Valve Weld On Fitting (You Choose Material) All our blow-off valves come supplied with aluminum adapters but if you are using a steel intake tube you will need the steel weld-on adapter, Aluminum weld-on adapters are designed to work with...