Bypass Valve Replacement supercharger bypass valve used on the 2.4 / 2.7 liter 2RZ/3RZ engines supercharger kits using the Magnuson blower unit. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

TRD Bypass Valve (Black Body) Replacement supercharger bypass valve used on the 3.4-liter 5vz engines as well as the 4.0-liter 1GR engines. TRD supercharger kits using the Magnuson blower unit. OEM Toyota Part #: PTR29-35040. NOTE: Special order...

Spark Plug Wire Clip This is the replacement cage that will go around the boot at distributor to lock the spark plug wire onto the cap. This is for the OEM wires or LC Engineering's pro 8.5mm spark plug wires. We always recommend the use of our Race...

Oxygen Sensor Adapter (2-Bolt Style To Thread In Style) This kit will adapt a thread in style O2 sensor (18mm) to the Toyota two-bolt style. Includes gasket plate to adapt and two studs and nuts. Contact our Tech Support Line for further...

Torsion bolt kit (4WD ONLY) (OEM) When you change or are adjusting the torsion bars it's a good idea to have new hardware. Years of use and extremely long threads on these bolts could get damaged and unusable. if you're changing the torsion bars on the...

Oil Pan This is a new, Rear Sump Toyota T100 oil pan. It is also a perfect replacement for your 3RZ Tacoma that is getting a solid axle swap kit. Original OEM Toyota Part #: 12101-75060 NOTE: Drain plug and gasket not included. If you are...

Oil Pan Kit (3RZ Tacoma w/ Solid Axle Swap) When installing a solid axle swap kit on your 95-04 Tacoma, you will notice that your stock oil pan will interfere with the new solid axle. We have solved this problem with a Rear Sump T100 oil pan kit. This...

Oil Pan This is a brand new factory Toyota oil pan. It is also a perfect replacement for your 5VZ Tacoma that is getting a solid axle swap kit. If you are installing a solid axle swap kit on your 5VZ Tacoma, then check out our complete oil pan kit...

Oil Pan Kit 3.4L V6 (5VZ-FE Tacoma w/Solid Axle Swap) When installing a solid axle swap kit on your 95-04 Tacoma, you will notice that your stock oil pan will interfere with the new solid axle. We have solved this problem with a T100 oil pan kit. This...

OEM Cylinder Head Bare Casting (8 Port) After testing numerous aftermarket head castings, we have come to the conclusion that the stock OEM Toyota casting is far superior to any other casting. This is the only casting we use for our cylinder heads,...

U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...

Dual Comp Clutch Kit (10") All of LC Engineering's clutch kits feature all new components with a single diaphragm H.D. pressure plate. Don't be fooled by fancy spinning gizmos. A diaphragm clutch delivers full holding power at all engine rpm's. Our...