1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Idle Air Compensator Valve O Ring This is the OEM rubber o ring gasket that is used on the 1995 to 2000 Toyota 3RZ throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Spark Plug Wire Clip This is the replacement cage that will go around the boot at distributor to lock the spark plug wire onto the cap. This is for the OEM wires or LC Engineering's pro 8.5mm spark plug wires. We always recommend the use of our Race...

NGK Spark Plug BKR5EGP (G-POWER PLATINUM) LC Engineering carries NGK G-Power Platinum spark plugs, they are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel...

NGK Spark Plug BPR5EGP (G-POWER PLATINUM) NGK G-Power Platinum spark plugs are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel efficiency. The small tip improves...

Valve Keeper (Hardened) Hardened Valve Keepers fit all 6mm valves using stock Toyota retainers and our Pro Titanium Retainers. A must for high rpm applications! NOTE: Keepers are sold as a single set (per valve). Contact our Tech Support Line...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

NGK Spark Plug (BKR5EYA / 2087) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...

NGK Spark Plug (BKR6EYA / 7990) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...