1999

Teflon Heat Isolation Gaskets (8 Port) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate for...

Stainless Steel 11" Clutch Line Don't get stuck with a leaking or inoperable clutch hydraulic system! This kit replaces the stock rubber line that extends down to your clutch slave cylinder.When your stock lines get old, the rubber starts to expand...

Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal. Premature wear of the throw-out bearing can occur when there...

Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system to for a quieter tone. This resonator features high temp long...

Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that "old school" sound, or we have used them as a resonator to quiet down your existing exhaust system. The 18" length is perfect for adding this resonator in conjunction...

Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...

OEM 2RZ Crank Position Sensor Rotor OEM Crank Position Sensor Rotor. This is also an optional upgrade for anyone with a 3RZ and is doing a balance shaft delete kit. OEM Toyota Part #: 19315-75010 Contact our Tech Support Line for further...

OE Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...

Exhaust Valve (Inconel / 31.5mm - 1mm Over) These valves are 1MM larger than stock, great for ported street heads that don't need the huge 2.5mm oversized valves. These Inconel valves are lighter than the stock steel valves and are extremely heat...

Trail Gear Rock Ripper Air Filter 8.8" (Replacement) This is the replacement air filter for the Tacoma 3.4Liter Extreme Rock Ripper Air Filter 8.8" kit, This filter is interchangeable with K&N filter RU-3050. NOTE: For the precharger for this...

Trail Gear Rock Ripper Air Filter 5" (Replacement) This is the replacement air filter for the Tacoma 2.4Liter Extreme Rock Ripper Air Filter 5" kit, This filter is interchangeable with K&N filter RU-4600. NOTE: For the precharger for this filter,...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...