1999

Thrust Bearing Set (Standard) These bearings for the 5VZ and 3VZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on any...

Heavy Duty Shifter Seat (White) It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position...

Brake Line Bracket (Right Side) This is the bracket that holds the brake line to the spindle. OEM Toyota Part #: 47351-35270 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Brake Line Bracket (Left Side) This is the bracket that holds the brake line to the spindle. OEM Toyota Part #: 47352-35310 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Denso Iridium IK24 Spark Plug These 3 step colder plugs are recommended by URD if you are running the 7th Injector and 2.1 pulley upgrade on a Supercharged 5VZ engine. If you are running the stock pulley (Low Boost) on the 5vz supercharger, Magnuson...

Seal Saver (Rear of Crankshaft) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the...

Seal Saver (Rear Main Seal) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank...

Oxygen Sensor Install Kit (2-Bolt Style) This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you want it in the exhaust. Kit Includes: (2) Studs and...

2-Bolt Flange (2 1/4") Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. Contact our Tech Support Line for further...

2 1/4" Radiator Cap (Large) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the large one that...

Rubber Tailpipe Hanger (3-Hole) Factory 3 Hole replacement rubber insulator for tailpipe. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

2-Bolt Wastegate Flange (You Choose Style) All of LC Engineering's flanges are laser cut then finished machined on the CNC to ensure exact tolerances and fit. These 2-bolt flanges fit most 38mm wastegates such as Tial, Turbosmart, and Turbonetics. They...