Pulley Bolt (Front Balancer) OEM Toyota front crank hub bolt fits all 2RZ and 3RZ engines. We recommend replacing the balancer bolt any time you replace the front balancer. OEM Toyota Part #: 90105-16041 Contact our Tech Support Line for...

Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...

Main Bearing Set Coated (Standard) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with...

OEM Main Bolt Set Time to replace those main bearing cap bolts while rebuilding your bottom end? No problem, we have you covered, order this complete set of 10 main cap bolts. Contact our Tech Support Line for further information at 928-575-2174...

Pro Main Stud Set ARP main bearing cap studs are manufactured from 8740 chrome-moly steel, heat-treated in-house, 200,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger...

Street Rod Bushing Set (4) Any time you remove your connecting rods it is a good idea to change out the piston pin bushings. After a while, the bushings will wear out causing the piston to "walk" in the bore and could eventually cause major engine...

Thrust Bearing Set (Standard) These thrust bearings for the 2RZ and 3RZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on...

Thrust Bearing Set Coated (Standard) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with...

Thrust Bearing Set (Standard) These bearings for the 5VZ and 3VZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on any...

Connecting Rod Bolt To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the stock rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Rod...

Hastings Street Piston Ring Set (95.00mm / Standard) LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with cast iron, chrome plated, barrel faced top compression rings. They have...

Hastings Street Piston Ring Set (95.50mm / +.020") LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with cast iron, chrome plated, barrel faced top compression rings. They have...