Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...

Thermostat Housing Gasket (Round / Rubber) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a round rubber O-ring style gasket that offers the best possible seal for your...

Round Collector Exhaust Gasket (2-Bolt x 2 1/2" Flange) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive...

Round Collector Exhaust Gasket (2-Bolt x 2 1/4" Flange) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive...

Brake Pedal Pad (Automatic Transmission Only) Is your brake pedal cover worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on your Pickups. Contact our Tech Support Line for further information at...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Idle Air Compensator Valve O Ring This is the OEM rubber o ring gasket that is used on the 1995 to 2000 Toyota 3RZ throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Valve Keeper (Hardened) Hardened Valve Keepers fit all 6mm valves using stock Toyota retainers and our Pro Titanium Retainers. A must for high rpm applications! NOTE: Keepers are sold as a single set (per valve). Contact our Tech Support Line...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...