2002

Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...

OEM 2RZ Crank Position Sensor Rotor OEM Crank Position Sensor Rotor. This is also an optional upgrade for anyone with a 3RZ and is doing a balance shaft delete kit. OEM Toyota Part #: 19315-75010 Contact our Tech Support Line for further...

OE Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...

Exhaust Valve (Inconel / 31.5mm - 1mm Over) These valves are 1MM larger than stock, great for ported street heads that don't need the huge 2.5mm oversized valves. These Inconel valves are lighter than the stock steel valves and are extremely heat...

Trail Gear Rock Ripper Air Filter 8.8" (Replacement) This is the replacement air filter for the Tacoma 3.4Liter Extreme Rock Ripper Air Filter 8.8" kit, This filter is interchangeable with K&N filter RU-3050. NOTE: For the precharger for this...

Trail Gear Rock Ripper Air Filter 5" (Replacement) This is the replacement air filter for the Tacoma 2.4Liter Extreme Rock Ripper Air Filter 5" kit, This filter is interchangeable with K&N filter RU-4600. NOTE: For the precharger for this filter,...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Rock Assault Front Axle Truss The Rock Assault™ Front Axle Truss will weld onto the top of your Rock Assault™ Front Axle Housing for extra protection against bending during competition or other extreme applications. The Rock Assault™ Front Axle Truss...

GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

Cam Follower (35mm / Shim Under Bucket) These 35mm cam buckets are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of...

Cam Follower (Shim Under Bucket) These 34mm Cam Followers are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of the...