2002

Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...

Pro Valve Shim (8mm Under Bucket / 1.45mm - 1.80mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.25mm - 2.60mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 2.65mm - 3.00mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 3.05mm - 3.30mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

Pro Valve Shim (8mm Under Bucket / 1.85mm - 2.20mm) LC Engineering upgraded cam buckets re-locate the valve shim from the top of the bucket to underneath the bucket. When the shims get re-located, you will have to change the shim to these under bucket...

PCV Grommet New PCV grommet for valve cover on 2RZ and 3RZ engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Round Collector Exhaust Gasket (2-Bolt x 2 1/2" Flange) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive...

Round Collector Exhaust Gasket (2-Bolt x 2 1/4" Flange) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive...

Thermostat Housing Gasket (Round / Rubber) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a round rubber O-ring style gasket that offers the best possible seal for your...

Brake Pedal Pad (Automatic Transmission Only) Is your brake pedal cover worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on your Pickups. Contact our Tech Support Line for further information at...

8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...