Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

Brake Proportioning Valve Relocation Bracket Kit When you lift a Tacoma or Tundra, the Brake Proportioning Valve no longer senses loads properly and can cause a potentially dangerous braking situation. This kit relocates the Brake Proportioning Valve...

BAKFlip MX4 Bed Cover (2005-2015 Tacoma) The BAKFlip MX4 has features, including matte-finished cab corner caps, clamps, and elevator bolts for a more streamlined look and feel. Other MX4 features include an enhanced functionality with pre-molded,...

Throttle Body Spacer Kit Airaid throttle body spacers feature a unique spiral bore that agitates the incoming air to promote better atomization of the fuel molecules, resulting in a more complete burn in the combustion chamber. These kits include a...

Rear Frame Reinforcement Plates 1995-2004 Tacomas have c-channel frames that are notorious for bending and cracking. The c-channel frame also contributes to axle wrap and wheel hoop at the rear axle. Toyota’s answer to this issue was to box in...

Rock Defense Rear Bumper6 Lug 4wd or PreRunner Only These rear bumpers are made in the U.S.A. and one of the strongest bumpers in the industry. Our Rock Defense bumpers are made out of 100% DOM tubing. The 1.75" OD X .120" wall thick DOM tubing will...

Type 0 Turbo Intercooler (31"x11.75"x3" / 3" Inlet / Outlet ) Features: Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM / 600 HP Pressure...

Type 1 Turbo Intercooler (31"x11.75"x3" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 2 Turbo Intercooler (31"x11.75"x4" / 3" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 7 Turbo Intercooler (29"x6"x2.5" / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7...

Type 11 Turbo Intercooler (19.75″x12″x3.5″ / 2.5" Inlet / Outlet ) Features: 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and...