2006

h1 class="pdhead"Cam Degree Wheel/h1 h2 class="pdhead"(7" Diameter)/h2 p These degree wheels are designed to ensure maximum accuracy during camshaft installations. They're made from anodized aluminum, and feature easy-to-read instructions etched into...

Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that old school sound, or they can be used in conjunction with the LC Engineering Pro Flow Exhaust system to for a quieter tone. This resonator features high temp long...

Resonator (w/o Inlet & Outlet Tubes) These are great to use as a muffler for that "old school" sound, or we have used them as a resonator to quiet down your existing exhaust system. The 18" length is perfect for adding this resonator in conjunction...

Flex Coupler (2 1/2" x 6") To reduce the stress on your exhaust system, we have these flex couplers to weld or clamp onto your pipe. Under acceleration, your engine has a tendency to torque to one side. A flex coupler will allow the engine to torque...

Collector Gasket LC Engineering only uses factory Toyota exhaust gaskets on the 2TR Exhaust or our Street Header. This ensures that you get the best seal on your exhaust with no chance of burning out cheap aftermarkets gaskets. This gasket will work...

Clutch Slave Cylinder The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...

OE Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...

+1MM Exhaust Valve (Inconel / 32.50MM) These valves are 1MM larger than stock (stock valves are 31.50MM), and great for ported street heads. These Inconel valves are lighter than the stock steel valves and are extremely heat resistant; These are a...

Exhaust Gasket OEM Toyota gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory style gaskets. Traditional paper exhaust gaskets do not last as long as the factory style...

GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

OE Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...