Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...

Round Collector Exhaust Gasket (2-Bolt x 2 1/2" Flange) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive...

Round Collector Exhaust Gasket (2-Bolt x 2 1/4" Flange) If you plan to connect your header to the rest of your exhaust, you will need a collector gasket. OEM gaskets feature a carbon material and stainless steel fire ring for a long life and a positive...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Air Injection Gasket LC Engineering only uses factory Toyota exhaust gaskets on the 2TR Exhaust or our Street Header. This ensures that you get the best seal on your exhaust with no chance of burning out cheap aftermarkets gaskets. OEM Toyota Part #:...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...

Exhaust Clamp (2 1/2") This 2-1/2" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2-Bolt x 2" Flange) OEM style exhaust gaskets feature a carbon material and stainless steel fire ring for long life and a positive seal. These round collector gaskets are the same type we use for all of our street header...

OEM Bellhousing to Block Alignment Pin (1978-2016 4Runner/Celica/FJ Cruiser/Pickup) OEM Bellhousing to Block Alignment Pin. OEM Toyota Part #: 90250-10113 Contact our Tech Support Line for further information at 928-575-2174. Note:...

Oil Drain Gasket LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This gasket goes between the turbo and the oil drain plate. Contact our Tech Support Line for further information...