Front Top Plate Spacer Kit Looking for something to get a little bit bigger tire under that rig of yours? A spacer is just the item needed to get the job done. Providing an additional 1/2" - 3/4" of lift to the front will keep those tires from rubbing...

Water Pump When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. These are all new OEM quality Japanese-manufactured pumps. The gasket is included with the pump. Contact our Tech Support...

Gauge Pillar (Double) (Gray) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil...

Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal. Premature wear of the throw-out bearing can occur when there...

3″ Billet Spacer (Flex Fan) This Flex Fan Spacer Kit has all the additional parts you need to install a 2TR Flex Fan. This spacer is made on our CNC lathe and mill made in the USA from billet aluminum. This spacer is 3" long and will clear all the...

2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

Haltech iC-7 Standard Dash Mount Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. Thats where this plate comes in, it makes life EASY. Grab yours today so you can spend your time doing what you...

Gauge Pillar (Double) (Unpainted-Gloss Black) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see...

2.5" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

3.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

Safety Auto Main Bearing Set When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...

Oil Drain Line (Stainless Steel Braided) Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...