Year

ULTIMATE Lift Hood Strut Kit (93-98 T100) Our new ULTIMATE Lift Hood Strut Kit for the ’93-98 T100 eliminates the prop rod and makes your engine compartment free and clear of obstacles. One-handed hood opening and closing â€" the struts lift...

OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...

1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...

Pro Fuel Map Sensor (SDS) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up to...

Pro Dual Valve Springs The Pro Dual Valve Springs are a "must-have" upgrade when running cam lift over .455" or when sustaining a constant 5,000rpm or higher. With 100lbs of seat pressure and open pressure of 210lbs (at .500" lift) they will work...

DJM Steel Lowering Block Kit (4" Rear) All steel block kits for those who have souped up your rides! Of Course they have new U-bolts, nuts and washers! Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...

Carburetor Rebuild Kit (Aisin / Stock) Don't get rid of your carb. Chances are it just needs to be rebuilt. This kit comes complete with everything you need to freshen up and rebuild your 22R Aisin 2-Barrel Carburetor for race, off-road or street use...

Steering Box Mount /Reinforcement (IFS Steering Box) If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing edges prevent frame cracking. Heavy duty design with a...

16" Flex Fan (Blue) Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex...

Gauge Pillar (Double) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil pressure,...

Wear Pad Only (9.5") Wear Pad Only - 2RZ(For LCE Aluminum Flywheel Only)(9.5")This goes to a discontinued product, don't order this unless you know that you need it. Contact our Tech Support Line for further information at 928-575-2174. Note:...