Year

IAC Coolant By-Pass Hose #2 (1985-1995 22RE/REC) LC Engineering is now offering OEM IAC Coolant By-Pass Hoses. Replacing the idle air control coolant bypass hose on the 22RE throttle body may be necessary due to issues such as leakage, age-related...

FJ-80 Tie Rod End (RH / LH Thread) Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. These rod ends are greaed for life and sealed. It will include the cotter pin and jam nut. M23 X 1.5 This product should not be used...

Sankei 555 Outer Tie Rod End (Driver Side) Time to replace those worn out stock tie rod ends? LC Engineering now carries a full line of tie rod ends for your Toyota 4Runner. These high-quality steering components are made by the same manufacturer...

Sankei 555 Outer Tie Rod End (Passenger Side) Time to replace those worn out stock tie rod ends? LC Engineering now carries a full line of tie rod ends for your Toyota 4Runner. These high-quality steering components are made by the same manufacturer...

Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for transferring the clutch pedal pressure hydraulically to the...

Weber 32/36 Jet Kit (Performance) This kit is used to richen the air/fuel mixture. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean fuel...

Pro Connecting Rod Bolt To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...

K&N Air Filter Element (E-2220) K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in...

Water Block Plate Kit (8 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 8-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Water Block Plate Kit (11 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 11-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Water Block Plate Kit (9 Bolt / Under Intake) This is the 9 bolt style water plate for the bottom of the 20R Cannon Downdraft Manifold. This kit comes with a billet aluminum water plate, mounting hardware, 3/8" npt plug and 90 degree fitting with a...

Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for transferring the clutch pedal pressure hydraulically to the...