Year

Intake Manifold Gasket Set (5VZ 1995-2004) OE Replacement intake manifold gasket set for 3.4L 5VZ engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...

Rear Track Arm Bushing These Energy Suspension performance polyurethane torque arm bushings reduce wheel hop on acceleration, shudder during braking, and adds greater handling control. These are a must when using larger tires and horsepower upgrades...

OEM Exhaust Hardware Kit This kit will contain (2) Bolts and (2) Springs needed for installing your exhaust back on at the collector. Kit Includes: (2) 90080-10291 Bolts (2) 90080-50392 Springs Contact our Tech Support Line for further...

Street Performer Retainer Set (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the...

Oil Pump Drive Spline (Single Row) If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right. OEM Toyota Part #:...

Exhaust Gasket OEM style gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory gaskets. Traditional paper exhaust gaskets do not last as long as the factory style gaskets...

Spring Seat Shim Set (Single Spring / .025″) Hardened Valve Spring Shims for 2RZ and 3RZ with Single Street Performer Valve Springs. NOTE: Sold as a set of (16). Contact our Tech Support Line for further information at 928-575-2174...

Fuel Pressure Gauge (Carbureted 1.5" Diameter 0-10 Psi) These fuel pressure gauges are for carbureted engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable, rust-free, stainless steel bezel and case and...

Weber Gasket Kit If you just need to freshen up the gaskets on your Weber carburetor, this kit if for you. It does not include any accelerator pump diaphragms or other parts included in a complete rebuild- only the gaskets. Contact our Tech...

Fuel Pressure Gauge (1.5" Diameter / 0-60 Psi) These fuel pressure gauges are for EFI engines that run low fuel pressures. They are compact and accurate, using a 1 1/2 in. diameter durable, rust-free, stainless steel bezel and case and a crisp,...

Brake Hard Line Kit (Left & Right) This caliper hard line kit is for straight axle Trucks and 4Runners only. This kit includes the caliper brake lines for both the right and left sides. NOTE: Not for IFS vehicles. Contact our Tech Support...