Year

Rear Main Seal Housing Gasket This gasket seals the rear main seal housing to the block on 20R-22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

NGK Spark Plug (BKR5EYA / 2087) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...

NGK Spark Plug (BKR6EYA / 7990) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...

NGK BKR7E Spark Plug (0-10 Psi / 12:1 Comp) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage...

OEM Locator Ring Dowel (Rocker Arm Assembly) Dowel pins and Ring dowel pins play a very important part in an engine build. If not utilized, they can lead to devastating problems with endless headaches. The tolerances on these pins are measured in...

Distributor Shaft O-Ring O-ring that seals the distributor shaft to the cylinder head. Keeps oil from leaking out and debris from getting in and contaminating the oil system. Contact our Tech Support Line for further information at 928-575-2174...

Exhaust Clamp (2 1/2") This 2-1/2" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our Tech Support Line for further information at...

CT20 Turbo Oil Feed Line Washer (Block Side) This is a replacement for the OEM turbo Oil Feed Line Washer for 22RET engines with the CT20 Turbo. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Throttle Linkage (Nut & Tab Washer) Have you lost your linkage bracket nut? No stress LC Engineering has you covered. We offer this kit to make your life a little easier. It will include one M8 x 1.0 nut as well as one Tab Washer to keep it from...

OEM Mechanical Lock Nut (Exhaust Manifold) When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on...