Pro Head Studs LC Engineering always recommends replacing the old used head bolts with new ones to ensure the correct head torque. The ARP 5VZ Cylinder Head Stud Set is a must for engines with increased cylinder pressure from high compression, nitrous...

OE Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...

OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 5VZ. If you are...

OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 3VZ. NOTE: Parts...

Pro Head Studs The ARP Cylinder Head Stud Set is a must for engines with increased cylinder pressure from high compression, nitrous oxide, turbocharged and supercharged applications. Made from 8740 Chromoly Steel, these studs test out at over 190,000...

PCV Relocation Kit If you're running an aftermarket carburetor on your 20R or 22R engine and you wish to retain the PCV system, you'll need a new place to run your rear PCV hose since the stock connection is part of the stock carburetor base plate...

Oil Cap O-Ring This oil cap o-ring fits both of LC Engineering's Billet Aluminum Oil Caps, see Part #: 1024082 as well as Part #: 1024088. All new oil caps come with this o-ring. Contact our Tech Support Line for further information at...

PCV Grommet New PCV grommet for valve cover on 2RZ and 3RZ engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

PCV Grommet New PCV grommet for valve cover on 20R, 22R, and 22RE engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

OEM PCV Valve (Steel) A Factory replacement OEM PCV valve with steel design straight up outlet. Use this PCV to replace the stock one that has the molded rubber hose. Don't forget the new PCV grommet, see Part #: 1024084 or the new hose from Toyota...

PCV Valve (Plastic) This replacement plastic PCV valve is perfect for those that are running aftermarket carburetors such as the Weber 32/36 or 38. The 90 degree PCV makes for a better transition when plumbing your manifold on these applications...

Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. NOTE: This is a part for the Pro Fuel Injection (SDS) setup we offer, not factory set-ups. Contact our Tech Support Line for further...