Exhaust Gasket OEM Toyota gaskets offer the best possible seal for your stock manifold or header. All the LC Engineering headers are designed to use the factory style gaskets. Traditional paper exhaust gaskets do not last as long as the factory style...

Stainless Steel U-Bend (2 1/2") LC Engineering sells 409 stainless tubing .065" wall for your project. 409 stainless is a great low-cost choice for exhaust systems. This is the same grade of stainless steel that we use in our Pro Flow exhaust systems...

Chevy Transmission Adapter (Flexplate Only) Are you wanting to bolt up a Turbo 350 or 400, 700R, Powerglide etc. to your 5VZ? This CNC made flexplate was designed to be used with our custom bell housing adapter. It will bolt on the 5VZ (3.4 V6)...

1ZZ Pro Clutch Disc Already have a LC Pro clutch kit and just need to replace the disk? Here you go! Just slip one of these in place of your old worn out disk and you will be good to go. This is a replacement disk for our 1ZZ Pro clutch kit...

Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for transferring the clutch pedal pressure hydraulically to the...

Throttle Body Gasket (Paper "O" Shape) Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. On the 3.4...

Throttle Body Extension (40mm) Use these extensions to provide a mounting surface for an air filter baseplate, beyond the fuel rails on 2900, 2930 and 3000 series throttle bodies. These components can also be used to extend the effective length of an...

Throttle Position Sensor (Sidedraft) Throttle position sensor for converting to sidedraft throttle body injection. If you would like to connect it to the wiring harness, see Part #: 1061095. NOTE: This throttle position sensor will not mount or...

Throttle Position Sensor Plug (Sidedraft) This plug is only to be used with sensor, see Part #: 1061090, and is for the individual fuel injection throttle body set up that we sell, see Part #: 1061100. NOTE: This throttle position sensor plug will...

Air Temp Sensor (â"¦Å“″ NPT) Air Intake Temperature sensor for use with our Pro Fuel Injection systems. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Coolant Temp Sensor This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector. Contact our Tech Support Line for further information at...

CT20 To Garrett GT25R Turbo Kit (For Stock Manifold) Is your CT20 Turbo going out? Not enough boost? Don't want to spend money on an inefficient turbo? LC Engineering has developed a perfect kit for you! We start by replacing the CT20 with a Garrett...