Power Steering Reservoir
When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock pump but is not adequate for...
Toyota Knuckle Rebuild Kit
(w/o Wheel Bearings)
Some people prefer knuckle rebuild kits with brand name Japanese "Koyo" trunnion bearings. Other than the brand of the bearings, the only difference in this kit is that the outer felt rings are not...
Solid Axle Knuckle Service Kit
(w/o Wheel Bearings)
When was the last time you serviced your knuckles? This service kit contains all standard replacement parts including gaskets, felts, seals, washers and shims. Kit includes inner axle seals and outer...
Tie Rod Kit
Trail-Gear has made the perfect kit for building tie rod links for use with a double-ended ram. Based on our testing and experience with kits like these, we know that the failure point is always in the tie rod ends, which is why Trail-Gear...
Flat Pitman Arm
Solid one piece design. Features FJ80 tapered hole. Extra strong and wide, one piece, forged design. Ideal for use with crossover steering. Your choice of flat arm or drop arm. The flat arm has no drop. The drop arm has same...
Stock Drop Pitman Arm
This Stock Drop Pitman Arm is a solid one piece, forged design, and features a FJ80 tapered hole. For use with crossover steering and features the same drop as the factory pitman arm.
This product should not be used in a manner...
Lower Knuckle Caps
(Solid Axle)
These stock replacement caps fit on the bottom of 79-85 Toyota solid axle knuckles.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information...
Trail Safe Knuckle Ball Wiper Seal
Tired of wiping big clumps of dirty sandy grease off of your knuckle balls after every trip? So are we. We asked our engineering department to look at the problems with the OEM design along with what was currently...
Crossover Steering Drag Link
(You Choose Size)
These heavy duty drag links are made from 1.25" x .250" wall DOM tubing. Precision tapped. Left side thread mark. Powder coat black finish. When installing a Rock Assault Front Axle Housing and using a hi...
Tie Rod
(Choose Your Length)
Trail Gear's heavy duty tie rods are made from 1.25" x .250" wall DOM tubing, precision tapped with a left side thread mark. Each rod is test fitted to ensure rod ends thread in with correct fit. Powder coat black finish...
Steering Columns
3 1/4 Inches: This steering column will allow you to use your existing Toyota steering linkage without having to buy a coupler and then cut and weld on your steering shaft. This steering column measures 3 1/4 inches from the base of...