Cross Drilled & Slotted Rotors Use To Convert:
Solid Axle Non-Vented Rotors To Vented Rotors
Fits: 1981-1985 solid axles with 8 hole style rotors.
Toyota Pick-Ups and 4Runners 1986+ feature larger vented rotors from the factory. Earlier 1979-1985 trucks used solid, non-vented rotors up front along with smaller calipers.
If you're installing a solid front axle on an 1986+ rig, you will want to install a set of these vented rotors onto the axle. With these rotors, you will be able use your existing larger IFS calipers. Simply unbolt your existing rotors and replace them with these vented rotors.
Slight grinding of the rotor's backing plate will be needed, then simply install the IFS calipers right onto the solid axle using the factory bolts.
These rotors can also be used on early trucks to increase braking effectiveness.
These are the replacement rotors used in our Big Brake Upgrade Kit: 1055205
*Application Note: Must Use 1985-1995 IFS Style Caliper.*
Benefits to upgrading to Cross Drilled and Slotted Rotors.
- Increased Pad & Rotor Life
- Reduced Rotor Warping
- Superior Braking Performance
- Faster Stops with Less Fade
- Improved Wet-Weather Braking
- Pads and rotors available to perfectly match your vehicle and driving technique
Contact our Tech Support Line for further information at 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.