Rear Disc Brake Pads Semi-metallic replacement brake pads for your Pickup or 4Runner rear disc brake kits. NOTE: These brake pads are only used as a replacement for our kit, see Part #: 1055202. Contact our Tech Support Line for further...

Dust Shield Eliminator Kit The brake backing plates can be a bother on front Toyota solid axles. They often get bent from trail damage and small rocks can get trapped between the backing plate and the rotor causing noise and damage. For many years we...

Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...

Brake Hard Line Kit (Left & Right) This caliper hard line kit is for straight axle Trucks and 4Runners only. This kit includes the caliper brake lines for both the right and left sides. NOTE: Not for IFS vehicles. Contact our Tech Support...

Swagelok (1/8" NP Male To 3/16" Tubing) These neat little devices make it much easier to plumb in brake accessories, like proportioning valves, line locks etc... One end has 1/8"npt threads to go into most brake accessory ports. The opposite end has a...

Brake Line Bracket (Right Side) This is the bracket that holds the brake line to the spindle. OEM Toyota Part #: 47351-35270 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Brake Line Bracket (Left Side) This is the bracket that holds the brake line to the spindle. OEM Toyota Part #: 47352-35310 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...

Trail Gear Brake Line Clip & Mount (Rear Line Only) This brake line mount kit is designed to fit Trail Gear extended length brake lines. If you've added a little (or a lot) extra ground clearance and suspension travel, you probably have added some...

Brake Caliper Hard Line (Left Side) This is the OEM hard line that goes from the caliper to the spindle. Tundra 2000-2006 / Sequoia 2002-2007 OEM Toyota Part #: 47318-0C020 Contact our Tech Support Line for further information at 928-575-2174...

Brake Caliper Hard Line (Right Side) This is the OEM hard line that goes from the caliper to the spindle. Tundra 2000-2006 / Sequoia 2002-2007 OEM Toyota Part #: 47315-0C020 Contact our Tech Support Line for further information at 928-575-2174...

Bleeder Cap (Rubber) When you replace the bleeder screw, be sure to replace this rubber cap. This cap keeps dirt and other debris from finding its way into the hole in the bleeder. Clogged bleeder screws can be a pain when it comes to bleeding your...